Due to the health benefits and protection from the dangers of smoking, vaporization has become immensely popular among people. It is the process by which active ingredients of a herbal substance are released by application of low temperature heat without burning the herbs. This procedure leads to a cleaner, healthier and unadulterated effect, devoid of carbon monoxide and tar, which are carcinogenic in nature.
Following are 10 easy steps that will enable you to operate the Trifold Vapor Tower.
Step 1
Heat up the 5 Vapor Tower, after turning it on for 5 minutes and set the dial around 12 O’clock.
Step 2
After this read the instructions manual and arrange the apparatus and substance accordingly.
Step 3
Now, very carefully open the bowl and put it on a solid surface with the glass side down.
Step 4
Grind the herbal substance forcefully and vigorously for some seconds.
Step 5
After grinding the material and making sure that it is perfectly amorphous, pour it on a business card. Then fold the card to put the material in the bowl.
Step 6
The material should just fill the bowl, do not overload. The screen should smoothly layer the substance.
Step 7
Hold the rubber insulation of the bowl and properly screw the handkit back on the bowl, carefully.
Step 8
Cautiously slide the handkit on the heater in the Vapor Tower.
Step 9
Now, the actual vaporization begins. Start with both short and fast puffs so as to get accustomed to the vapors. Be careful that you do not inhale a lot in the first go. It is important that you find your comfort level by alternating breathing speeds and durations. Accordingly increase the intensity of the heat, set it to 1 O’clock and wait sometime for stronger vapors.
Step 10
Once you have had your fill, carefully remove the handkit from the Vapor Tower. The glass bowl will be extremely hot and hence , let it cool for sometime and maneuver it by holding the rubber insulation only. Dispose the used substance and repeat the process as needed.