The Vapir Vaporizer is another easy to use, state-of-the-art vaporizer with all the component of a standard vaporizer as well as some other advanced features. It has a mouthpiece, heating chamber, a protective heating shield, LCD display, power input, temperature regulator, LED light, Tube, X-tube, rechargeable battery and a charger (optional). It is a very handy vaporizer without any additional and highly complicated parts that hinder rather than assist in the vaporization experience.

Following are the instructions that should be carried out when using a Vapir Vaporizer.

1. Grind your favorite herbs very finely and reduced the plant material almost to powder form.
2. Now preheat the unit to the recommended temperature that of 360°/192°F to 375°/207°C.
3. Set the required temperature by using the temperature regulator system which can be used to increase or decrease the temperature. Setting the temperature to an optimal figure requires a lot of time and is also specific to the herbs that are being vaporized. If you are not getting enough vapors then turning temperature up is advised otherwise lower down the temperature.
4. Next step is to unscrew the mouthpiece and adjust the temperature that you desire. Press the heat button to activate the heating mechanism. LED will start glowing showing that the heat is being utilized and warming up the unit. Temperature that is displayed first on the screen will be the set temperature and then the actual temperature.
5. After the unit has been preheated, put the herbs into the chamber. Make sure that you do not touch the unit under any circumstances as it is very hot. Never touch near or inside the unit, when it is hot.
6. Only fill half of the unit and never full. Overloading will result in obstructing of the vapor formation.
7. Turn the mouthpiece clockwise while attaching it to the unit.
8. Now simply start inhaling the vapors from the tube, slowly and deeply. Enjoy the flavors and essences through the vapors. Do not inhale directly through the mouthpiece as the unit is very hot and might injure your lips or other parts.
9. Make sure that you soak up the tube in warm water to boil the tube and hence clean it.
10. After using the unit, clean off the herbs by using to spoon that is included in the purchase package. Do not damage the internal mesh while cleaning the residue.

Charging the Battery

• To charge the battery connect the battery to the unit and uses following the instructions given above.
• The battery should be charged for at least 8-12 hours to charge it fully. For first use, charge the battery for full one night or no less than 12 hours. A fully charged battery will last for 1 full hour of continuous heating. It is not at all advisable to charge the battery for 24 hours.
• A 12V car adapter can also be used to charge the battery of the Vapir Vaporizer. For this, all you have to do is attach the car battery to the unit. However, do not use this device or any other aroma therapy device while driving or operating heavy machinery.

If you go step by step according to the directions, you will be able to achieve the optimal vaporization experience and enjoy ecstatic flavors and essences in no time.

This entry was posted on Wednesday, September 24th, 2008 at 4:42 am and is filed under Instructional. You can follow any responses to this entry through the RSS 2.0 feed. Both comments and pings are currently closed.