Vaporizers have made the life of those who indulge in vaporization, very easy. Not only does vaporization prevents cancer and other disease that are caused by smoking, but also helps people get the needed buzz by utilizing advanced technology. Most of the latest vaporizers come with state-of-the-art functions that tell the user, when it is safe to use the vaporizer and when it is time to turn off. In order to use the vaporizer efficiently, one should thoroughly read the instructions and use it accordingly. Sometimes the vaporizers are preset to temperature between 200ËšF and 375ËšF.

Following are the instructions that should be kept in mind while using a vaporizer. These are given to simplify the use for the individual.

1.  Heat up the vaporizer for 2 minutes and wait for the LED to turn on but will glow in different colors. The fan will start when the desired temperature is reached. Meanwhile, insert the tubing into glass vapor whip and load the herbal substance.
2.  Make sure that the substance is finely grounded. Do not overload the glass bowl and put only 1/3 of the clear glass chamber above the screen.
3. Inhale from your mouth piece into the glass whip and creating a vacuum, suck up the material to be vaporized, insert glass whip in the glowing heating chamber and start inhaling deep and slow for at least 10 seconds.
4.  Start inhaling quickly and keep steady for about 8 seconds or until desired flavored is achieved. Adjustment of temperature is only required if there is some amount of moisture content in the herbal material.

If the vapor that you are getting is either too weak or too harsh then you need to adjust the temperature of your unit. In order to do this, adjust the temperature on your vaporizer by holding the button P until SP starts flashing. To adjust the temperature, press and hold the up button for stronger vapors and their increased densities. Hold the down button for obtaining lighter vapors.

When the material is thoroughly vaporized then it will turn tan but never dark or burnt. After using, blow out the residue in a waste basket and switch off the whole unit by turning off the power button. The fans will automatically switch off after it has reached a cool temperature. The Stealth will also shut off on its own and next time you want to use it, simply turn the power on and wait for LED light and fans to come on. Insert your loaded whip and enjoy using the vaporizer by following the instructions given above.

Clean the glass whip very often by dipping it in 90% USP rubbing alcohol, rinse with fresh water and blow dry. If the screen cannot be used then replace it with a new one. Screen or a tube can be easily bought from a hardware store.

Safety Tips

1.  Always place the whole unit on a non-combustible surface. It should also be taken into consideration that the outlets for air and fans should not be blocked from any side in order to prevent heating up unnecessarily.
2.  Never use it around children .
3.  Always shut down the whole unit, when not in use. Prolonged heating up of the vaporizer may cause damage to is system and may also cause injuries to the person using it.
4.  It is not advisable to leave the unit unattended while it is on. Always make sure that it is switched off before you head for something new.
5. Never exhale or insert any foreign object into the heat chamber. Also never put your finger inside the heating glass chamber tube, this will result in damage to both the component and to you as well. Turn the unit off, quickly if it happens accidentally, let the vaporizer cool off for a while. After the unit has cooled off, only then unplug it and move it around. Wipe the front and back of the unit with an air duster and practice the cleaning routine more regularly by blowing clean air into front and back of the unit.
6. Keep the vaporizer as dust free as possible.

This entry was posted on Wednesday, September 24th, 2008 at 3:32 am and is filed under Instructional. You can follow any responses to this entry through the RSS 2.0 feed. Both comments and pings are currently closed.