Arizer Extreme Q Vaporizer Helpful Tips & Techniques

Are you using the Extreme Q Vaporizer and looking for some tips and tricks on how to get the most out of it?  Then this article is definitely geared towards you.  First up we will speak about the screens that come with the Extreme Q  and the best way to go about cleaning them.  The first screen sits in the middle of the Cyclone bowl and is a flat, run of the mill circular screen.  The second screen (elbow adaptor screen) that has the shape of a small bowl should be cleaned at least once a month if your vaporizer is being used daily.  The actual elbow adaptor and cyclone should also be cleaned regularly.  You are going to want to soak it in rubbing alcohol for at least 30 minutes and rinse it off every few weeks.  This is highly recommended since it will allow for some nice big and thick hits. 
Just make sure that when you are drawing your hits that you don’t draw too hard, since this can flip over the screen inside the Cyclone bowl.  If this does occur, simply tap the screen back into place and make sure you take less powerful hits in the future.  Like with all vaporizers you are going to want to take slow, long hits to get the best results.  Of course you also are going to want to use a grinder to grind down your herbs to the smallest particulates possible.  You will then want to stir the Cyclone bowl between each session or at least every 5 hits.  This will give you the most surface area to allow for the best hits possible.  If you go by these easy-to-follow steps, you should be able to enjoy your Extreme Q Vaporizer for years to come.

Comments (0)

Did you enjoy this blog?

Post a comment
Cancel